New Lilliput HDMI-SDI monitor

The new Lilliput monitor, with EasyDive aluminum case, uses a SDI connection with only 2 cables and for this reason is very robust and does not suffer from breaking problems that normally have external HDMI cables that use other manufacturers.

It is composed of an anodized anti-corroded aluminum case 40 microns with double sealing o-ring and equipped with the on-off mechanical key, and a lever closure with a safety lock.

Inside the Neway (Lilliput) 5.5 "monitor is housed that fits perfectly into a custom-created accommodation, leaving room for angular 2-pole micro SDI connection jack.

In the monitor kit, a specially modified HDMI-SDI converter is provided, which is installed inside the housing. The converter takes power directly from the internal case of the case, for this reason it is advisable to add an extra battery for the case.

The converter is connected to the monitor via a 2-pole fischer connector, on request it is possible to insert a second SDI output to bring the signal to the surface with a cable up to 50 meters long.

- Body:
- Anticorodal aluminum case
- 1 Mechanical on-off command
- Hinged closure with safety lock
- 1 2-pole Fischer connector
- double sealing oring
- 1 ball 25 mm diameter for attach to the housing (it is possible to position it below or above according to your preference)

- Monitor included:
- Neway Lilliput 5.5 "FullHD
- battery and battery charger

- Dimensions:
- Height: 120mm
- Width: 220mm
- Depth: 80mm (120mm with the lens hood)

- Weight and depth:
- Weight: 2 kg

- Weight in Dive: 0.490 kg

- Depth of use: 100m