Sphera 360 Abyss Version
With Sphera 360 EasyDive launches into the world of 360 VR.
The only Housing in the world guaranteed up to 350 meters deep.
This extraordinary housing dedicated to the Insta360Pro 2, therefore allows you to make underwater images at 360° with a very high quality.
Of course, all the technology that Easydive has patented over the years has been used in it.
Sphera 360 Version "Abyss":
This version includes the Sphera 360 housing, including an additional internal battery (extra autonomy 1 hour and 30 minutes), battery charger, 2 caps protectors for the assembly.
With this version, it will be possible to install the housing on an underwater ROV, and control the vision and settings of the InstaPro2, through a dedicated ethernet cable.
In water, the housing is almost neutral underwater, and therefore you can easily hold up to create incredible images in a very simple way.
Select the maximum resolution available
The Housing is made of 2 aluminum blocks, with double sealing o-rings to have the maximum sealing, and allow use up to a depth of -350m.
To have the maximum yield of the different cameras, 6 plexiglass microdomes were applied which derive from the portholes for DSLR and mirrorless housings.
The closing system takes place via 4 stainless steel hinges.
Externally there are also, 1 Mechanical button with double o-rings, and 1 small plexiglass window that displays the internal display of the Insta360Pro 2.
On the top part of the housing there are 12 M6 threaded holes, 2 zincs for protect the housing from corrosion and galvanic currents, also 2 M14x1 caps, these are predispositions to be able to install different accessories: Vacuum System , surface video output, hydrophone, other ...
At the bottom of the housing there are 10 threaded holes M6, there are also 2 M14X1 caps, a panel connector will be installed in the cap.
The series of M6 threaded holes on the base of the housing, allow the fixing of different accessories, eg. Tripod, Moby, Polecam etc ...
Inside the housing there is an ethernet cable for controlling and viewing the Insta360Pro 2 via a PC, 1 additional battery which is used to power the Insta360Pro 2, 1 camera fixing system which takes place via 1 slide and 1 locking knob.
Included in the price a battery charger and the 12.8V and 3.3 ah additional battery, which serves to provide additional power supply of about 1 hour and 30 minutes to the Insta360Pro 2 (in addition to its internal battery).
Commands:
The new Sphera 360 housing as described above, has only one mechanical command to manage the turn on and off, All the controls of the InstaPro2 can be managed via PC with the ethernet connection.
General features:
• "Very high quality and complete management of the Insta360Pro 2", the new Sphera 360 is the first Housing in the world, with remote control by smartphone.
• "Robustness", made from 2 blocks of anticorodal aluminum and double sealing o-rings that guarantee operation up to -350m and life warranty* EasyDive.
• "Technology", Sphera 360 is the result of over 20 years of experience in electronic control in underwater housings.
• "Power", the new Sphera 360 is equipped with a battery pack that power the Insta360Pro 2.
• Preparation for installing the Vacuum System (optional, included in Silver and Gold Version)
• Robustness: the first housing guaranteed up to -150 m thanks to the double o-rings closing
• Manageable: thanks to its volume in water it is practically neutral.
• After sell support: Like all other EasyDive housings, Sphera 360 is also sold directly by the producer to the consumer, to ensure maximum after-sales assistance.
* Life warranty is subordinated to an annual maintenance performed At EasyDive.
Sphera 360 Version Abyss includes:
- 1 anticorodal aluminum housings with double o-rings, on/off mechanical button.
- 1 12.8V and 3.3 ah additional battery, which guarantees a Extra power supply of about 1 hour and 30 minutes in addition to the battery Standard of the Insta360Pro 2, and equipped with battery charger.
- 2 female panel connector, with internal ethernet cable. One connector will be installed in the housing, the second will be provided for installation on the ROV.
- 1 Ethernet-type cable 1 meter long with double male connector for connection between housing and ROV.
- 2 zinc to protect the housing from salt and corrosion.
- 2 protection caps to secure the housing
- 4 stainless steel hinges closures
- 4 M14X1 stainless steel caps to allow the installation of different accessories (eg Vacuum System etc ...)
- Different threaded holes M6 and to allow the installation of different accessories, support trays, tripods, transport handle etc ..
- The following accessories are included with the deep-sea version
- An Extendable Starter Ball (SF/PT/SF) installed under the case
- A single connection clamp
- An M6 Sphere or other standard, to be placed on the ROV.
TECHNICAL FEATURES
Dimensions:
• Height: 290 mm.
• Width: 165mm.
• Diameter: 160 mm.
• Weight of the Housing complete with additional battery without Insta360Pro 2: 2.3 kg
• Complete weight of additional battery and Insta360Pro 2: 3.6 kg
• Weight in Water complete with additional battery and Insta360Pro 2: 100 gr
• Maximum depth guaranteed: 350 m