We have taken maximum power to an efficiency of about 21,000 lumen and 4000° K of colour temperature.

Thanks to the installation of a LiFe battery, of a Bridgelux LED and of a switchboard with Bluetooth processor, you can customize the power for the 3 positions of the selector, we can rename your Revolution as you prefer, you can activate and adjust the Flash power and the Flash function (available with Leo3 Smart and Diveshot housings for smartphone). All with the free RevMote app.

Also available with Fly Mode function, which does not allow the turning of the LED light by twisting the knob: an additional level of security beside the mechanical lock intended for transport in a suitcase.

The Revolution light box allows no waterways because it was made from a solid block of aluminium. 
Charging occurs via an external watertight connector: there is no need to open the light to access the batteries. This eliminates all possibility of error in closing and guarantees and guarantees perfect watertightness down to - 150 meters.

We have eliminated any other waterway such as a cap or exhaust valve thanks to the new LiFe batteries (lithium iron phosphate), which do not produce gas during use or charging. 

Shades allow rapid cooling in the water. 

On the front side, the Revolution has a crystal lens which allows it to triple the depth of the field of light in the water.
Comparative tests*, conducted on the same lighting device, highlight the difference in the water between a flat glass, a dome and a crystal lens: the lens in optical crystal increases the depth of light penetration, the flat glass or the dome make the illumination angle of the LED superior to 160° and accomplish a great dispersion of luminous power.

Additionally, a special photographic film smooths the light and softens it at the edges.

Set the Revolution 21000 up with the RevMote app:

• Download the RevMote app from Play Store or Apple Store onto your smartphone.
• Turn the knob of the Revolution by one click (Position 1): the LED light does not turn on, but the Bluetooth connection is activated.
• On your phone, pair the Revolution via Bluetooth. With Android, the first pairing occurs via Bluetooth / phone settings, while with iOS the first pairing occurs via the RevMote app.
• When you have paired the Revolution, the name RevMote Revolution appears in the app.
• To turn on the Led Light, disable the Fly Mode from the menu in the upper right. Turn the knob into shutdown position and then turn it again into Position 1 to turn the LED light on.
  Now Revolution is ready to be configured! 
  
  From the menu in the upper right, you can also change the name of your LED Light (for ex.: Revolution 1, Revolution 2, …), as well as enabling and disabling the Fly Mode.

For each associated LED Light there are 3 pages dedicated to three positions of the magnetic switch on the Revolution. 

For each position you can:

• set LED power from 0 to 150%.
• enable or disable the Flash function* and set the power of the focus light from 0 to 150%.
  Always remember to save the settings before using your LED light.
• Flash Function compatible with Leo3 Smart and Diveshot housings.

We have every confidence in our lighting system: in case of flooding, we repair it for you under guarantee. 

(Excluding flooding due to impact damage or lens breaking which would compromise its watertightness.)